Aluminum Plant Steam Fluid Hose Protection Thermal Insulation Fire Sleeve

• Customization: Available
• Material: Silicone Fiberglass
• Capability: Hose Protection
• Model NO.: Fire Sleeve
• Color: Black,Blue,Red and Customizable
• Customizable: Support Customization
• Samples: Available
• After-Sales Service: 360days
• Length: 50m, 25m, 20m and Customizable
• Temperature: 260
• Wall: 1.5mm to 5mm
• Size: 6 to 127mm
• Weight: 7.2 to 36 Kg/Roll
• Delivery Time: 20 ~ 45days
• Transport Package: Carton Box or as Your Request
• Specification: 1/4"~5"
• Trademark: JTDFLEX/OEM
• Origin: Shandong Province, China
• HS Code: 40092100
• Production Capacity: 1000000m/Year
• Package Size: 30.00cm * 30.00cm * 30.00cm
• Package Gross Weight: 20.000kg

Product Description

Product Description

 

 

Product Features: Industry fire sleeve is designed to protect hoses, wires and cables from the hazards of high heat and occasional flame.

 

Material: Silicone sleeve with glass-fibre braid
 

Elasticity:No cracking detachment of coating shall be visible after 3 hours at 200ºC ±2ºC

 

Flame Resistance: Not less than 45 second/25mm
 

Breakdown Voltage KV: 16kv-18kv
 

Color: blue, red, black,gray
 

Temperature: Continuous protection at an operating temperature of 260°C. Ability to withstand a molten splash at 1200°C.

 

    

Size		Wall	Tolerance	Roll length	Ctn size	Carton	Weight	MOQ
mm	Inch	mm	mm	m	cm	m	Kg/roll	m
Φ6	1/4	1.5	±0.15	50	47*47*10	100	7.2	200
Φ8	5/16	1.5	±0.15	50	47*47*10	100	8.5	200
Φ10	3/8	2	±0.20	25	47*47*10	100	11.5	200
Φ11	7/16	2	±0.20	25	47*47*10	100	12	200
Φ13	1/2	2	±0.20	25	47*47*10	100	12.5	200
Φ15	5/8	2	±0.20	25	47*47*10	100	19	200
Φ19	3/4	2	±0.20	25	47*47*10	100	28	200
Φ22	7/8	2	±0.20	25	47*47*10	100	30	200
Φ25	1	2	±0.30	25	47*47*10	100	32.5	200
Φ29	1 1/8	2	±0.30	25	47*47*10	50	20.5	200
Φ32	1 1/4	2	±0.30	25	47*47*10	50	22	200
Φ35	1 3/8	3	±0.30	25	47*47*15	50	26.5	200
Φ38	1 1/2	3	±0.30	25	47*47*15	50	28	200
Φ40	1 3/5	3	±0.30	25	47*47*15	50	30.5	200
Φ41	1 5/8	3	±0.30	25	47*47*15	50	31	200
Φ45	1 3/4	3	±0.30	25	47*47*15	50	34.5	200
Φ48	1 7/8	3	±0.30	25	47*47*15	50	37	200
Φ51	2	3	±0.35	25	52*52*20	50	39	200
Φ55	2 1/5	3.5	±0.35	25	52*52*20	50	41.5	200
Φ57	2 1/4	3.5	±0.35	25	52*52*20	50	42	200
Φ60	2 3/8	3.5	±0.35	20	52*52*20	20	20	200
Φ64	2 1/2	3.5	±0.35	20	52*52*20	20	21.5	200
Φ65	2 3/5	3.5	±0.35	20	52*52*20	20	23	200
Φ70	2 3/4	3.5	±0.40	20	52*52*20	20	26	200
Φ76	3	4	±0.40	20	52*52*20	20	28	200
Φ80	3 1/5	4	±0.40	20	52*52*20	20	29.5	200
Φ83	3 1/4	4	±0.40	20	52*52*20	20	30	200
Φ85	3 3/8	4	±0.40	20	52*52*20	20	31	200
Φ89	3 1/2	4	±0.50	20	52*52*20	20	32.2	200
Φ90	3 9/16	4	±0.50	20	52*52*20	20	34	200
Φ95	3 3/4	4	±0.50	20	52*52*20	20	36	200
Φ102	4	5	±0.50	10	52*52*20	10	18.5	200
Φ110	4 1/3	5	±0.50	10	54*54*20	10	20	200
Φ114	4 1/2	5	±0.50	10	54*54*20	10	22	200
Φ120	4 4/5	5	±0.50	10	54*54*20	10	23	200
Φ127	5	5	±0.50	10	54*54*20	10	24	200

Installation Guide

 

 

1.Choose the proper fire sleeve to match the hydraulic hose diameter. The fire sleeve is slightly bigger than a wrapped hydraulic hose.
 

2.Cut the fire sleeve to get the target length to wrap the whole hydraulic hose. 
 

3.Compress the air in the fire sleeve, to let it out.
 

4.Slide the hydraulic hose into the fire sleeve protection carefully.
 

5.Install the hydraulic hose fittings to lock the hydraulic hose ends. 
 

6.Estimate both ends to avoid potential problems, such as fluid wicking, thermal transfer, and glass fiber escape.

Notice:
   FIRE SLEEVE performs best when installed with a loose fit over a hose. However, some end users insist on a tight fit for the sake of appearance. To achieve this tight fit, use compressed air to expand FIRE SLEEVE as it is installed over the hose. Length of FIRE SLEEVE will shorten in length as it increases in diameter, so allow for some extra length to compensate for this.

    For a loose fit, there is no hard and fast rule to relate the Nominal Inside Diameter of FIRE SLEEVE with the Nominal Outside Diameter of the hose being covered. However, it is important to take two factors into account: hose length and hose cover.

    For hoses up to 5 metres (16 ft) long, use a Nominal Inside Diameter of FIRE SLEEVE 15% larger than the Nominal Outside Diameter of hose being covered. For hoses over 5 metres (16 ft) long, use a size 20% larger. Remember the FIRE SLEEVE must slide over the outside of the hose. The longer the hose, the tougher it is to install, especially if enough tolerance on a long hose has not been allowed.

    As the FIRE SLEEVE must slide over the outside of the hose, the hose covering also requires special consideration. A hose with a rough rubber cover is more difficult to slide FIRE SLEEVE over than a hose with a smooth cover.

    For hose covers that have a high co-efficient of friction, be sure to allow for greater tolerance between the Nominal Inside Diameter of FIRE SLEEVE and the Nominal Outside Diameter of the hose to be covered.
 

Detailed Photos

 

Product Range

We are manufacturing and marketing all kinds of hydraulic hose&fittings, we can also produce according to customer's drawings or samples.

Hydraulic Hose(Full range of DIN and SAE):
Wire braided: SAE R1/DIN EN 1SN, SAE R2/DIN EN 2SN, SAE R16, SAE R17
Wire spiral: SAE R9, R12, R13, DIN EN 4SP, DIN EN 4SH
Textile braided: SAE R3, SAE R6, SAE R5
PTFE Hose, SAE R7, SAE R8

Industrial Hose:
Air hose--WP 20 bar/300 PSI, BP 60 bar/ 900 PSI. 50-100M per roll.
Water hose--WP 20 bar/300 PSI, BP 60 bar/ 900 PSI. 50-100M per roll.
Suction hose--Water suction hose, water discharge hose, oil suction hose, oil discharge hose.
Sand blast hose--High abrasion resistant hose.
Welding hose--Oxygen hose, Acetylene hose, Twin hose

Hose Protection: 
Plastic Hose Guard
Silicone Fire Sleeve
Nylon Braided Sleeve 

Hose Ferrule: 

For SAE 100R1AT/EN 853 1SN,1ST, EN857 1SC Hose 

For SAE 100R2AT/EN 853 2SN,1ST, EN857 2SC Hose  

For SAE R9, R12, R13, DIN EN 4SP, 4SH
For SAE R7, R8, and kind of other hose

Hose Fittings: 
1) Material: Carbon steel, Stainless steel
2) Finish: yellow Zinc plated, White Zinc Plated
3) Standards: SAE, JIC, BSP, NPT, DIN, etc

 

Exhibition

 

  

Product Packaging

 

Certifications

 

FAQ

Q1. Who is Juye Jintongda?
A: We are a professional manufacturer of hydraulic hose and industrial hose with various specifications from 1999. We integrates the Research & Development, Production, Sales Export and focus on the high quality products all the time. 

Q2. Please, do you have OEM service?
A: Yes, we have OEM  service.

Q3. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings.

Q4. What is your sample policy?
A: Usually the sample is free of charge, but the customers have to pay for the freight charge.

Q5. What is your terms of packing?
A: Generally, we pack our goods in neutral white wearable woven bags. If you have legally registered patent, 
we can pack the goods in your branded boxes after getting your authorization letters.

Q6. What is your payment term?
A: T/T 30% in advance, and 70% before delivery or against copy of documents.

Q7. What is your delivery term?
A:  EXW, FOB, CFR, CIF,etc.

Q8. How about your delivery time?
A: Generally, it will take 20 to 60 days after receiving your advance payment. The specific delivery time depends 
on the items and the quantity of your order.

Q9. Please,do you have quality certificate?
A: Yes, we have ISO 9001, SGS, CE and related test report.

Q10. How long can you guarantee the goods?
A: We guarantee the goods one year.

Q11. Please, do you test all your goods before delivery? 
A: Yes of course, we have 100% burst pressure test and impulse tests before delivery.